UniBond UltraForce Wall Tile Adhesive & Grout Grey 12.8kg

UniBond wall tile adhesive and grout triple protect contains Ultra Force fibre technology for ultimate durability. The triple protection system repels and protects from mould with a revolutionary slow release anti-mould fungicide lasts more than 50% longer than standard fungicides. The drying time is 24 hours and it is suitable for ceramic, porcelain, mosaic and natural stone surfaces, so can be used in all rooms. The high grab non-slip formula makes it easy to use to achieve excellent results.

Preparation

1. Walls must be flat, rigid and clean. Prime dusty or wooden surfaces with UniBond Super PVA diluted with water.

2. Mark a horizontal line one tile plus one grout space, from the bottom of the area to be tiled.

3. Use a plumb line to mark a vertical line down the centre of the wall. Adjust as necessary to avoid awkward or thin tile cuts. Begin tiling at the intersection of these lines.

Application of adhesive

1. Apply the adhesive to the wall using a tiling trowel

2. Fix tiles within 30 minutes of spreading the adhesive. Bed the tiles firmly using a twisting action. Use tile spaces to ensure evenly space grout lines. Remove excess adhesive immediately with a damp cloth.

3. Tile small areas at a time finishing with the bottom row

Grouting

1. Leave ceramic tiles for a least 24 hours before grouting. For porcelain and large tiles, leave for at least 72 hours or, until adhesive with a grout float.

2. Working in a small areas at a time, press the grout into the joints with a grout float.

3. Smooth off the grout line with a grouting tool. Remove any surplus grout immediately with a damp sponge, wiping diagonally across the tiles.

4. Allow the grout to dry for 24 hours then polish with a clean cloth

5. To maintain a mould free grout, wash regularly with a fungicidal cleaner